Enum InvalidTransaction

pub enum InvalidTransaction {
Show 32 variants PriorityFeeGreaterThanMaxFee, GasPriceLessThanBasefee, CallerGasLimitMoreThanBlock, CallGasCostMoreThanGasLimit { initial_gas: u64, gas_limit: u64, }, GasFloorMoreThanGasLimit { gas_floor: u64, gas_limit: u64, }, RejectCallerWithCode, LackOfFundForMaxFee { fee: Box<Uint<256, 4>>, balance: Box<Uint<256, 4>>, }, OverflowPaymentInTransaction, NonceOverflowInTransaction, NonceTooHigh { tx: u64, state: u64, }, NonceTooLow { tx: u64, state: u64, }, CreateInitCodeSizeLimit, InvalidChainId, MissingChainId, TxGasLimitGreaterThanCap { gas_limit: u64, cap: u64, }, AccessListNotSupported, MaxFeePerBlobGasNotSupported, BlobVersionedHashesNotSupported, BlobGasPriceGreaterThanMax, EmptyBlobs, BlobCreateTransaction, TooManyBlobs { max: usize, have: usize, }, BlobVersionNotSupported, AuthorizationListNotSupported, AuthorizationListInvalidFields, EmptyAuthorizationList, Eip2930NotSupported, Eip1559NotSupported, Eip4844NotSupported, Eip7702NotSupported, Eip7873NotSupported, Eip7873MissingTarget,
}
Expand description

Transaction validation error.

Variants§

§

PriorityFeeGreaterThanMaxFee

When using the EIP-1559 fee model introduced in the London upgrade, transactions specify two primary fee fields:

  • gas_max_fee: The maximum total fee a user is willing to pay, inclusive of both base fee and priority fee.
  • gas_priority_fee: The extra amount a user is willing to give directly to the miner, often referred to as the “tip”.

Provided gas_priority_fee exceeds the total gas_max_fee.

§

GasPriceLessThanBasefee

EIP-1559: gas_price is less than basefee.

§

CallerGasLimitMoreThanBlock

gas_limit in the tx is bigger than block_gas_limit.

§

CallGasCostMoreThanGasLimit

Initial gas for a Call is bigger than gas_limit.

Initial gas for a Call contains:

  • initial stipend gas
  • gas for access list and input data

Fields

§initial_gas: u64

Initial gas for a Call.

§gas_limit: u64

Gas limit for the transaction.

§

GasFloorMoreThanGasLimit

Gas floor calculated from EIP-7623 Increase calldata cost is more than the gas limit.

Tx data is too large to be executed.

Fields

§gas_floor: u64

Gas floor calculated from EIP-7623 Increase calldata cost.

§gas_limit: u64

Gas limit for the transaction.

§

RejectCallerWithCode

EIP-3607 Reject transactions from senders with deployed code

§

LackOfFundForMaxFee

Transaction account does not have enough amount of ether to cover transferred value and gas_limit*gas_price.

Fields

§fee: Box<Uint<256, 4>>

Fee for the transaction.

§balance: Box<Uint<256, 4>>

Balance of the sender.

§

OverflowPaymentInTransaction

Overflow payment in transaction.

§

NonceOverflowInTransaction

Nonce overflows in transaction.

§

NonceTooHigh

Nonce is too high.

Fields

§tx: u64

Nonce of the transaction.

§state: u64

Nonce of the state.

§

NonceTooLow

Nonce is too low.

Fields

§tx: u64

Nonce of the transaction.

§state: u64

Nonce of the state.

§

CreateInitCodeSizeLimit

EIP-3860: Limit and meter initcode

§

InvalidChainId

Transaction chain id does not match the config chain id.

§

MissingChainId

Missing chain id.

§

TxGasLimitGreaterThanCap

Transaction gas limit is greater than the cap.

Fields

§gas_limit: u64

Transaction gas limit.

§cap: u64

Gas limit cap.

§

AccessListNotSupported

Access list is not supported for blocks before the Berlin hardfork.

§

MaxFeePerBlobGasNotSupported

max_fee_per_blob_gas is not supported for blocks before the Cancun hardfork.

§

BlobVersionedHashesNotSupported

blob_hashes/blob_versioned_hashes is not supported for blocks before the Cancun hardfork.

§

BlobGasPriceGreaterThanMax

Block blob_gas_price is greater than tx-specified max_fee_per_blob_gas after Cancun.

§

EmptyBlobs

There should be at least one blob in Blob transaction.

§

BlobCreateTransaction

Blob transaction can’t be a create transaction.

to must be present

§

TooManyBlobs

Transaction has more then max blobs

Fields

§max: usize

Maximum number of blobs allowed.

§have: usize

Number of blobs in the transaction.

§

BlobVersionNotSupported

Blob transaction contains a versioned hash with an incorrect version

§

AuthorizationListNotSupported

EIP-7702 is not enabled.

§

AuthorizationListInvalidFields

EIP-7702 transaction has invalid fields set.

§

EmptyAuthorizationList

Empty Authorization List is not allowed.

§

Eip2930NotSupported

EIP-2930 is not supported.

§

Eip1559NotSupported

EIP-1559 is not supported.

§

Eip4844NotSupported

EIP-4844 is not supported.

§

Eip7702NotSupported

EIP-7702 is not supported.

§

Eip7873NotSupported

EIP-7873 is not supported.

§

Eip7873MissingTarget

EIP-7873 initcode transaction should have to address.

Trait Implementations§

§

impl Clone for InvalidTransaction

§

fn clone(&self) -> InvalidTransaction

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Debug for InvalidTransaction

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl<'de> Deserialize<'de> for InvalidTransaction

§

fn deserialize<__D>( __deserializer: __D, ) -> Result<InvalidTransaction, <__D as Deserializer<'de>>::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
§

impl Display for InvalidTransaction

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Error for InvalidTransaction

1.30.0 · Source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
Source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
§

impl<DB, TXE> From<InvalidTransaction> for EVMError<DB, TXE>

§

fn from(value: InvalidTransaction) -> EVMError<DB, TXE>

Converts to this type from the input type.
§

impl Hash for InvalidTransaction

§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
§

impl PartialEq for InvalidTransaction

§

fn eq(&self, other: &InvalidTransaction) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Serialize for InvalidTransaction

§

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
§

impl Eq for InvalidTransaction

§

impl StructuralPartialEq for InvalidTransaction

§

impl TransactionError for InvalidTransaction

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,