revm_context_interface::result

Enum InvalidTransaction

Source
pub enum InvalidTransaction {
Show 29 variants PriorityFeeGreaterThanMaxFee, GasPriceLessThanBasefee, CallerGasLimitMoreThanBlock, CallGasCostMoreThanGasLimit, RejectCallerWithCode, LackOfFundForMaxFee { fee: Box<U256>, balance: Box<U256>, }, OverflowPaymentInTransaction, NonceOverflowInTransaction, NonceTooHigh { tx: u64, state: u64, }, NonceTooLow { tx: u64, state: u64, }, CreateInitCodeSizeLimit, InvalidChainId, AccessListNotSupported, MaxFeePerBlobGasNotSupported, BlobVersionedHashesNotSupported, BlobGasPriceGreaterThanMax, EmptyBlobs, BlobCreateTransaction, TooManyBlobs { max: usize, have: usize, }, BlobVersionNotSupported, EofCrateShouldHaveToAddress, AuthorizationListNotSupported, AuthorizationListInvalidFields, EmptyAuthorizationList, InvalidAuthorizationList(InvalidAuthorization), Eip2930NotSupported, Eip1559NotSupported, Eip4844NotSupported, Eip7702NotSupported,
}
Expand description

Transaction validation error.

Variants§

§

PriorityFeeGreaterThanMaxFee

When using the EIP-1559 fee model introduced in the London upgrade, transactions specify two primary fee fields:

  • gas_max_fee: The maximum total fee a user is willing to pay, inclusive of both base fee and priority fee.
  • gas_priority_fee: The extra amount a user is willing to give directly to the miner, often referred to as the “tip”.

Provided gas_priority_fee exceeds the total gas_max_fee.

§

GasPriceLessThanBasefee

EIP-1559: gas_price is less than basefee.

§

CallerGasLimitMoreThanBlock

gas_limit in the tx is bigger than block_gas_limit.

§

CallGasCostMoreThanGasLimit

Initial gas for a Call is bigger than gas_limit.

Initial gas for a Call contains:

  • initial stipend gas
  • gas for access list and input data
§

RejectCallerWithCode

EIP-3607 Reject transactions from senders with deployed code

§

LackOfFundForMaxFee

Transaction account does not have enough amount of ether to cover transferred value and gas_limit*gas_price.

Fields

§fee: Box<U256>
§balance: Box<U256>
§

OverflowPaymentInTransaction

Overflow payment in transaction.

§

NonceOverflowInTransaction

Nonce overflows in transaction.

§

NonceTooHigh

Fields

§tx: u64
§state: u64
§

NonceTooLow

Fields

§tx: u64
§state: u64
§

CreateInitCodeSizeLimit

EIP-3860: Limit and meter initcode

§

InvalidChainId

Transaction chain id does not match the config chain id.

§

AccessListNotSupported

Access list is not supported for blocks before the Berlin hardfork.

§

MaxFeePerBlobGasNotSupported

max_fee_per_blob_gas is not supported for blocks before the Cancun hardfork.

§

BlobVersionedHashesNotSupported

blob_hashes/blob_versioned_hashes is not supported for blocks before the Cancun hardfork.

§

BlobGasPriceGreaterThanMax

Block blob_gas_price is greater than tx-specified max_fee_per_blob_gas after Cancun.

§

EmptyBlobs

There should be at least one blob in Blob transaction.

§

BlobCreateTransaction

Blob transaction can’t be a create transaction. to must be present

§

TooManyBlobs

Transaction has more then specification::eip4844::MAX_BLOB_NUMBER_PER_BLOCK blobs

Fields

§max: usize
§have: usize
§

BlobVersionNotSupported

Blob transaction contains a versioned hash with an incorrect version

§

EofCrateShouldHaveToAddress

EOF crate should have to address

§

AuthorizationListNotSupported

EIP-7702 is not enabled.

§

AuthorizationListInvalidFields

EIP-7702 transaction has invalid fields set.

§

EmptyAuthorizationList

Empty Authorization List is not allowed.

§

InvalidAuthorizationList(InvalidAuthorization)

Invalid EIP-7702 Authorization List

§

Eip2930NotSupported

EIP-2930 is not supported.

§

Eip1559NotSupported

EIP-1559 is not supported.

§

Eip4844NotSupported

EIP-4844 is not supported.

§

Eip7702NotSupported

EIP-7702 is not supported.

Trait Implementations§

Source§

impl Clone for InvalidTransaction

Source§

fn clone(&self) -> InvalidTransaction

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for InvalidTransaction

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl<'de> Deserialize<'de> for InvalidTransaction

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Display for InvalidTransaction

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Error for InvalidTransaction

1.30.0 · Source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
Source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
Source§

impl From<InvalidAuthorization> for InvalidTransaction

Source§

fn from(value: InvalidAuthorization) -> Self

Converts to this type from the input type.
Source§

impl<DB, TXERROR: From<InvalidTransaction>> From<InvalidTransaction> for EVMError<DB, TXERROR>

Source§

fn from(value: InvalidTransaction) -> Self

Converts to this type from the input type.
Source§

impl Hash for InvalidTransaction

Source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
Source§

impl PartialEq for InvalidTransaction

Source§

fn eq(&self, other: &InvalidTransaction) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl Serialize for InvalidTransaction

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl Eq for InvalidTransaction

Source§

impl StructuralPartialEq for InvalidTransaction

Source§

impl TransactionError for InvalidTransaction

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,